[  310.764643] PM: suspend entry (s2idle)

[  310.768687] Filesystems sync: 0.004 seconds

[  310.775173] Freezing user space processes

[  310.776739] Freezing user space processes completed (elapsed 0.001 seconds)

[  310.776745] OOM killer disabled.

[  310.776746] Freezing remaining freezable tasks

[  310.777593] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)

[  310.777599] printk: Suspending console(s) (use no_console_suspend to debug)

[  312.142761] qcom-pcie 1c10000.pcie: Device not found

[  312.458544] qcom-pcie 1c00000.pcie: PCIe Gen.3 x1 link up

[  312.463393] geni_i2c 890000.i2c: Unbalanced pm_runtime_enable!

[  312.463403] geni_i2c 894000.i2c: Unbalanced pm_runtime_enable!

[  312.463413] geni_i2c a90000.i2c: Unbalanced pm_runtime_enable!

[  312.495147] ath11k_pci 0000:01:00.0: htt event 5 not handled

[  312.520715] usb-conn-gpio connector-2: repeated role: device

[  312.732316] OOM killer enabled.

[  312.732321] Restarting tasks: Starting

[  312.734390] Restarting tasks: Done

[  312.734404] efivarfs: resyncing variable state

[  312.876857] efivarfs: finished resyncing variable state

[  312.878241] PM: suspend exit

[  312.891205] wlp1s0: deauthenticating from f0:61:c0:fb:1a:30 by local choice (Reason: 3=DEAUTH_LEAVING)

[  313.011068] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0

[  313.011365] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-1

[  313.011743] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-2

[  313.012148] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-3

[  313.153181] qcom-ethqos 23040000.ethernet end0: PHY [stmmac-0:1c] driver [Qualcomm QCA8081] (irq=POLL)

[  313.165847] qcom-ethqos 23040000.ethernet end0: Enabling Safety Features

[  313.165998] qcom-ethqos 23040000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported

[  313.166192] qcom-ethqos 23040000.ethernet end0: registered PTP clock

[  313.166197] qcom-ethqos 23040000.ethernet end0: configuring for phy/2500base-x link mode

[  321.064115] wlp1s0: authenticate with f0:61:c0:fb:1a:30 (local address=c8:a3:e8:dd:3f:cd)

[  321.064131] wlp1s0: send auth to f0:61:c0:fb:1a:30 (try 1/3)

[  321.103166] wlp1s0: authenticated

[  321.104810] wlp1s0: associate with f0:61:c0:fb:1a:30 (try 1/3)

[  321.112349] wlp1s0: RX AssocResp from f0:61:c0:fb:1a:30 (capab=0x411 status=0 aid=1)

[  321.135391] wlp1s0: associated 