[  187.411407] [drm:dpu_encoder_phys_disable:1426] [dpu error]enc35 timeout pending

[  190.053004] PM: suspend entry (s2idle)

[  190.054994] Filesystems sync: 0.001 seconds

[  190.067176] Freezing user space processes

[  190.069372] Freezing user space processes completed (elapsed 0.002 seconds)

[  190.069383] OOM killer disabled.

[  190.069387] Freezing remaining freezable tasks

[  190.070698] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

[  190.070709] printk: Suspending console(s) (use no_console_suspend to debug)

[  190.123924] dwc3-qcom a600000.usb: port-1 HS-PHY not in L2

[  190.563097] qcom-pcie 1c08000.pcie: PCIe Gen.3 x2 link up

[  190.563209] pcieport 0001:02:01.0: Unable to change power state from D3hot to D0, device inaccessible

[  190.563225] pcieport 0001:02:02.0: Unable to change power state from D3hot to D0, device inaccessible

[  190.563241] pci 0001:04:00.0: Unable to change power state from unknown to D0, device inaccessible

[  190.563255] pcieport 0001:02:03.0: Unable to change power state from D3hot to D0, device inaccessible

[  190.563270] pci 0001:05:00.0: Unable to change power state from unknown to D0, device inaccessible

[  190.563285] pci 0001:05:00.1: Unable to change power state from unknown to D0, device inaccessible

[  190.695359] geni_i2c 980000.i2c: Unbalanced pm_runtime_enable!

[  190.695377] geni_i2c 984000.i2c: Unbalanced pm_runtime_enable!

[  190.948497] OOM killer enabled.

[  190.948504] Restarting tasks: Starting

[  190.955104] Restarting tasks: Done

[  190.955132] efivarfs: resyncing variable state

[  190.992762] efivarfs: finished resyncing variable state

[  191.002575] PM: suspend exit

[  191.027366] wlan0: deauthenticating from f0:61:c0:fb:1a:30 by local choice (Reason: 3=DEAUTH_LEAVING)

[  196.394912] wlan0: authenticate with f0:61:c0:fb:1a:30 (local address=f0:74:e4:66:b0:4f)

[  196.394945] wlan0: send auth to f0:61:c0:fb:1a:30 (try 1/3)

[  196.398001] wlan0: authenticated

[  196.399210] wlan0: associate with f0:61:c0:fb:1a:30 (try 1/3)

[  196.404751] wlan0: RX AssocResp from f0:61:c0:fb:1a:30 (capab=0x411 status=0 aid=18)

[  196.417554] wlan0: associated 