[  301.727815] PM: suspend entry (s2idle)

[  301.730409] Filesystems sync: 0.002 seconds

[  301.735928] Freezing user space processes

[  301.737476] Freezing user space processes completed (elapsed 0.001 seconds)

[  301.737481] OOM killer disabled.

[  301.737483] Freezing remaining freezable tasks

[  301.738560] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

[  301.738563] printk: Suspending console(s) (use no_console_suspend to debug)

[  303.115850] qcom-pcie 1c10000.pcie: Device not found

[  303.431878] qcom-pcie 1c00000.pcie: PCIe Gen.3 x1 link up

[  303.441020] geni_i2c 890000.i2c: Unbalanced pm_runtime_enable!

[  303.441030] geni_i2c 894000.i2c: Unbalanced pm_runtime_enable!

[  303.441038] geni_i2c a90000.i2c: Unbalanced pm_runtime_enable!

[  303.481036] ath11k_pci 0000:01:00.0: htt event 5 not handled

[  303.496581] usb-conn-gpio connector-2: repeated role: device

[  303.734766] OOM killer enabled.

[  303.734771] Restarting tasks: Starting

[  303.736558] Restarting tasks: Done

[  303.736570] efivarfs: resyncing variable state

[  303.857394] efivarfs: finished resyncing variable state

[  303.857962] PM: suspend exit

[  303.868886] wlp1s0: deauthenticating from f0:61:c0:fb:1a:30 by local choice (Reason: 3=DEAUTH_LEAVING)

[  303.998632] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-0

[  303.998903] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-1

[  303.999260] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-2

[  303.999574] qcom-ethqos 23040000.ethernet end0: Register MEM_TYPE_PAGE_POOL RxQ-3

[  304.114188] qcom-ethqos 23040000.ethernet end0: PHY [stmmac-0:1c] driver [Qualcomm QCA8081] (irq=POLL)

[  304.126881] qcom-ethqos 23040000.ethernet end0: Enabling Safety Features

[  304.127034] qcom-ethqos 23040000.ethernet end0: IEEE 1588-2008 Advanced Timestamp supported

[  304.127218] qcom-ethqos 23040000.ethernet end0: registered PTP clock

[  304.127224] qcom-ethqos 23040000.ethernet end0: configuring for phy/2500base-x link mode

[  312.166311] wlp1s0: authenticate with f0:61:c0:fb:1a:30 (local address=c8:a3:e8:dd:3f:cd)

[  312.166327] wlp1s0: send auth to f0:61:c0:fb:1a:30 (try 1/3)

[  312.170959] wlp1s0: authenticated

[  312.174931] wlp1s0: associate with f0:61:c0:fb:1a:30 (try 1/3)

[  312.181881] wlp1s0: RX AssocResp from f0:61:c0:fb:1a:30 (capab=0x411 status=0 aid=15)

[  312.223829] wlp1s0: associated 