[  192.078084] [drm:dpu_encoder_phys_disable:1426] [dpu error]enc35 timeout pending

[  193.792631] PM: suspend entry (s2idle)

[  193.794459] Filesystems sync: 0.001 seconds

[  193.806338] Freezing user space processes

[  193.808633] Freezing user space processes completed (elapsed 0.002 seconds)

[  193.808645] OOM killer disabled.

[  193.808649] Freezing remaining freezable tasks

[  193.809972] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

[  193.809982] printk: Suspending console(s) (use no_console_suspend to debug)

[  194.608891] [drm:dpu_encoder_phys_disable:1426] [dpu error]enc35 timeout pending

[  194.643170] dwc3-qcom a600000.usb: port-1 HS-PHY not in L2

[  195.127286] qcom-pcie 1c08000.pcie: PCIe Gen.3 x2 link up

[  195.127409] pcieport 0001:02:01.0: Unable to change power state from D3hot to D0, device inaccessible

[  195.127430] pcieport 0001:02:02.0: Unable to change power state from D3hot to D0, device inaccessible

[  195.127448] pci 0001:04:00.0: Unable to change power state from unknown to D0, device inaccessible

[  195.127468] pcieport 0001:02:03.0: Unable to change power state from D3hot to D0, device inaccessible

[  195.127485] pci 0001:05:00.0: Unable to change power state from unknown to D0, device inaccessible

[  195.127502] pci 0001:05:00.1: Unable to change power state from unknown to D0, device inaccessible

[  195.266716] geni_i2c 984000.i2c: Unbalanced pm_runtime_enable!

[  195.266758] geni_i2c 980000.i2c: Unbalanced pm_runtime_enable!

[  195.524891] OOM killer enabled.

[  195.524897] Restarting tasks: Starting

[  195.531036] Restarting tasks: Done

[  195.531066] efivarfs: resyncing variable state

[  195.579804] efivarfs: finished resyncing variable state

[  195.589587] PM: suspend exit

[  195.618905] wlan0: deauthenticating from f0:61:c0:fb:1a:30 by local choice (Reason: 3=DEAUTH_LEAVING)

[  197.671859] [drm:dpu_crtc_disable [msm]] *ERROR* frame done wait timed out, ret:0

[  197.680068] [drm:dpu_crtc_disable:1238] [dpu error]crtc72 wait for frame done failed;frame_pending1

[  205.265510] wlan0: authenticate with f0:61:c0:fb:1a:30 (local address=f0:74:e4:66:b0:4f)

[  205.265540] wlan0: send auth to f0:61:c0:fb:1a:30 (try 1/3)

[  205.269220] wlan0: authenticated

[  205.289701] wlan0: associate with f0:61:c0:fb:1a:30 (try 1/3)

[  205.295564] wlan0: RX AssocResp from f0:61:c0:fb:1a:30 (capab=0x411 status=0 aid=21)

[  205.315664] wlan0: associated

[  213.555626] [drm:dpu_encoder_phys_disable:1426] [dpu error]enc35 timeout pending

[  225.817060] [drm:dpu_encoder_phys_disable:1426] [dpu error]enc35 timeout pending

[  275.242537] [drm:dpu_encoder_phys_disable:1426] [dpu error]enc35 timeout pending

[  279.533254] [drm:dpu_encoder_phys_disable:1426] [dpu error]enc35 timeout pending 