[  352.310481] PM: suspend entry (s2idle)

[  352.313533] Filesystems sync: 0.002 seconds

[  352.329100] Freezing user space processes

[  352.331645] Freezing user space processes completed (elapsed 0.002 seconds)

[  352.331665] OOM killer disabled.

[  352.331669] Freezing remaining freezable tasks

[  352.333059] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)

[  352.333070] printk: Suspending console(s) (use no_console_suspend to debug)

[  352.389900] dwc3-qcom a600000.usb: port-1 HS-PHY not in L2

[  352.866840] qcom-pcie 1c08000.pcie: PCIe Gen.3 x2 link up

[  352.866992] pcieport 0001:02:01.0: Unable to change power state from D3hot to D0, device inaccessible

[  352.867017] pcieport 0001:02:02.0: Unable to change power state from D3hot to D0, device inaccessible

[  352.867037] pci 0001:04:00.0: Unable to change power state from unknown to D0, device inaccessible

[  352.867057] pcieport 0001:02:03.0: Unable to change power state from D3hot to D0, device inaccessible

[  352.867078] pci 0001:05:00.0: Unable to change power state from unknown to D0, device inaccessible

[  352.867099] pci 0001:05:00.1: Unable to change power state from unknown to D0, device inaccessible

[  353.009110] geni_i2c 980000.i2c: Unbalanced pm_runtime_enable!

[  353.009147] geni_i2c 984000.i2c: Unbalanced pm_runtime_enable!

[  353.234242] OOM killer enabled.

[  353.234248] Restarting tasks: Starting

[  353.236656] Restarting tasks: Done

[  353.236686] efivarfs: resyncing variable state

[  353.307127] efivarfs: finished resyncing variable state

[  353.307207] PM: suspend exit

[  353.335056] wlan0: deauthenticating from f0:61:c0:fb:1a:30 by local choice (Reason: 3=DEAUTH_LEAVING)

[  358.407613] ath11k 17a10040.wifi: failed to flush transmit queue, data pkts pending 1

[  363.510829] ath11k 17a10040.wifi: failed to flush transmit queue, data pkts pending 1

[  373.031730] wlan0: authenticate with f0:61:c0:fb:1a:30 (local address=00:03:7f:12:05:05)

[  373.031767] wlan0: send auth to f0:61:c0:fb:1a:30 (try 1/3)

[  373.038345] wlan0: authenticated

[  373.054274] wlan0: associate with f0:61:c0:fb:1a:30 (try 1/3)

[  373.060461] wlan0: RX AssocResp from f0:61:c0:fb:1a:30 (capab=0x411 status=0 aid=26)

[  373.082186] wlan0: associated 